Precor Efx 5.23 Error Codes
Most units have the lift capacitor mounted inside the lift motor, and others use external lift capacitors. You may want to resolve any issues you are experiencing with the EFX before clearing the error log. 22.When you are ready, press OK to cycle back to the ODOMETER, or Whichever component was last connected when the error 3x reappears, is the cause for the error. Bad lift capacitor.5. his comment is here
See my profile for more info I don't think it's the speed sensor or The elevation Motor. Elliptical 5.17 equipped with old software version 1.01 in upper and lower PCA.4. When I called him back, he indicated it was the lift motor ($300 plus his labor) – that the diagnostics indicated this. In my experience error 30's were normally an electronic board Look at the error 30 code description below to get a better understanding. i thought about this
Precor Error 32
Possible Remedies 1. Copy the error code information to paper so you can provide it to Customer Support if needed. Also, how is the customer to know what systems are related and what aren't? Error 33 is defined as faulty data received from upper PCA Possible Causes 1.An upper PCA to lower PCA interconnect cable is bad. 2.The interconnect cable at the upper PCA was
- They don't.
- I have read the previous comments and thats what I come up with.
- The customer only paid once.
- Remember it's an error 30.
- See the proper service manual for the motor being tested.
Google Feb. 04/08,03:46 PM #2 theGOOCH International Man of Mystery Join Date Jun 2007 Location Cincinnati, OH Posts 2,508 Yeah, I'd stick with precor. After reading posts on this site, I think I need to replace the wire from the screen down to where the computer (microprocessor?) is located. I am getting an error code 30 (communication error). Precor Error 82 I find this hard to believe because the machine has never gone into error 30 mode when the lift motor was running.
Thats why they depend on the service Companies to give them accurate honest answers. Precor Error 15 Maybe there is no hope and it is a defective machine, but I was wondering if anyone had any ideas about what to do. Speed sensors normally tell you to pedal or pedal faster. http://www.manualslib.com/manual/512351/Precor-Efx-5-21.html?page=50 The tech that recalibrated it I bet also touched the wires.
Bad interconnect cable between upper and lower PCA.7. Precor Treadmill Error Code 82 If the unit shows any other error instead of the error-3x, plug components in one at a time (cycle power when doing this) until the error-3x returns. Error 30 remember. Another component plugged onto the PCA is overloading the +5VDC power supply.6.
Precor Error 15
Be sure to copy it exactly as shown. 4. I don't have this video yet, so maybe I'll have to make one. Precor Error 32 Total Items: Most Recently Added: Description QTY Price more items in your cart. Precor Treadmill Error 29 Capacitor can also fail in the open condition which would result with the lift motor trying to run but not having normal power.
Plug the new cable into the upper board and lower board. this content Calibrate the lift motor per the proper procedure for the unit being serviced and reattach the lift motor to the ramp (elliptical) or lift platform (treadmill). The correct receptacle has the tab opening at its base. You can also do this yourself. Precor Elliptical Error 40
All rights reserved. Please try the request again. Only re-calibrating the lift motor will not solve the problem. weblink AS IT SHOULD BE!!!
Troubleshooting Error Codes If any error codes appear in the display, turn the unit Off and On. Precor Error 42 If the lift capacitor is shorted the lift fuse blows. The most recent error recorded appears on the lower display.
Test unit with a known good upper PCA.
Be sure to copy it exactly as shown. 4. Test unit with a known good interconnect cable. If this happened, the lift would not operate in one direction. Precor Pca Jun. 22/08,08:28 AM #7 Mark Peterson In Orientation Join Date Feb 2008 Location Austin, Texas Posts 14 Just Like I said Well, Finally I fixed a landice HR problem.
A good capacitor will read AC peak voltage while an open capacitor reads AC RMS voltage. I also have a how to video page on fixing exercise equipment for do it yourselfers.