Home > Printer Error > Printer Error 53.10

Printer Error 53.10

Turn the printer power off and then turn the printer power on. Figure 45: Disconnecting cables Grasp the cover on the right side of the printer and pull it firmly toward the rear of the printer until it stops. top 60.X PRINTER ERROR Description A tray [X] that was opened or filled is trying to lift into position, but there is an obstruction in the tray. If the problem persists, contact HP Customer Support. this content

Pulled the formatter, lined up the mounting pins correctly and the formatter seated all the way in and booted. alternates with 59.XY PRINTER ERROR To continue turn off then on Description A temporary printing error occurred. Are you aComputer / IT professional?Join Tek-Tips Forums! Replace all the DIMM memory.8. http://fixyourownprinter.com/posts/45488

If the error persists, contact HP support. Remove the print cartridge and check the paper path for paper. If you are printing from Tray 1, verify that the correct paper size is selected at the printer control panel.

alternates with 59.XY PRINTER ERROR To continue turn off then on 59.2 MAIN MOTOR ROTATION ERROR 59.4 EP MOTOR ROTATION ERROR (HP LaserJet 4300 only) 60.X PRINTER ERROR 62 NO SYSTEM Action Press the (Select) button to resume printing. Turning the printer off and then on can clear some of these messages. Manuals / Documents Download any of our HP 4200tn manuals for free!

The page containing the error will automatically be reprinted. 2. Action NOTE: Press the ? (help) button for detailed information about clearing the jam. Solution: This is an invalid configuration. Registration on or use of this site constitutes acceptance of our Privacy Policy.

Register now while it's still free! HP COLOR LASER PRINTER 8500 1. Plug the printer into a wall outlet and see if this resolves the problem. top 59.4 EP MOTOR ROTATION ERROR (HP LaserJet 4300 only) Description The print-cartridge drive motor (HP LaserJet 4300 only) is not functioning properly.

Probably you'll need replace the formater board.Good Luck. If the above action does not solve the issue, contact HP, or contact an authorized service provider. If the message persists, contact HP Customer Support. UPC - 808736314077 Free HP 4200tn manuals!

Printing can continue, but behave unexpected in response to the changed settings. http://spamdestructor.com/printer-error/printer-error-58-04.php top 49.XXXX PRINTER ERROR To continue turn the printer off then on Description The printing operation has been aborted. Remove one or all the DIMMS, or move one of the DIMMS to a different slot. alternates with 52.XY PRINTER ERROR To continue turn off then on Description A temporary printer error has occurred.

All rights reserved.Unauthorized reproduction or linking forbidden without expressed written permission. Get a Professional Answer Via email, text message, or notification as you wait on our site.Ask follow up questions if you need to. 100% Satisfaction Guarantee Rate the answer you receive. Loose toner should clear from the printer after a few pages are printed. have a peek at these guys If possible, print to another network printer to verify the network is working correctly.

SIMM malfunction. 2. Types of messages Status messages Status messages reflect the current state of the printer. If the above action does not solve the issue, contact HP or an authorized service provider.

If jammed paper is present, remove it.

  • Look for the jam in another location, contact HP, or contact an authorized service provider.
  • Sign Up Login Add Question ghostjoy asked Feb 27, 2007 at 11:18am 0 HP LaserJet 4100 HP laserjet 4100 printer error 53.10.03 I have a HP Laserjet 4100 printer which has
  • X Description 0- Scanner error 1- Scanner startup error 2- Scanner rotation error Action Press the (Select) button to continue.
  • HP LaserJet 4345 M4345 ADF (automatic document feeder) Cleaning ...
  • Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps.
  • top top 40 EIO X BAD TRANSMISSION To continue press (Select) Description The connection has been broken abnormally between the printer and the EIO card (HP Jetdirect card) in the specified

however try this take out the formatter and take out the board, it might be a dry solder join, to fix it use a hairdryer to heat the solder, on the The deflector is behind the rear output bin door and is made of black plastic. If the above action does not solve the issue, reload the tray with the correct paper size. top 64 PRINTER ERROR For help press?

Reduce the complexity of the print job to avoid the error. Close the door. Replace a DIMM or EIO device if it is the one that has caused the error. check my blog Loose toner should clear from the printer after a few pages are printed.

Remove and reinstall the print cartridge, then press the Select button. How to fix HP Printer Error 13.20.00 in HP 4200 4250 4300 4350 Series Printer - Duration: 3:52. If necessary, lift the black plastic guide that is located on the top of the fuser to gain access to the jammed paper. Make sure the bottom tab on the cover fits into the corresponding slot in the printer.

The dual inline memory module (DIMM) that caused the error will not be used. PDF Manual QuickSetupGuide_English.pdf.... Oct 24, 2016 | Printers & Copiers 0 Answers Error "Record insertion failure data base" in Tally.ERP9 Oct 24, 2016 | Printers & Copiers 0 Answers The color on SP55 Plus