Home > Printer Error > Printer Error 60.2

Printer Error 60.2

If the error persists, replace the stapler cartridge. Reply With Quote 12-04-2009 #6 Deano View Profile View Forum Posts Private Message Technician Join Date Oct 2009 Location St helier Posts 21 Post Thanks / Like Thanks (Given) 0 Thanks The printer will continue to print after pressing the green SELECT button. by dmzcompute on May 10, 2006 at 12:14pm Add comment Please sign in to comment 0 If I ever find a problem I haven't seen before, I always check this forum this content

Turn off printer power. The media is probably wrapped around the fuser roller. Replace formatter board. If the message persists, replace the duplexer.

If the message persists, turn the printer power off and then on again. Open the trays, remove the paper, and remove the obstruction. If the printer is on a network, AUTO CONTINUE should probably be set to ON. top 50.5 FUSER ERROR Description The printer detected that the wrong fuser is installed.

  • If the message persists, contact HP Customer Support.
  • Reason: grammatical Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke
  • Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps.
  • We have been having this error alot lately and more than half the time the power supply is at fault.
  • If the above action does not solve the issue, contact HP, or contact an authorized service provider.
  • I do service some HP's though, but only a couple of the 4200. :-) PCRMike by pcrmike on Aug 12, 2005 at 9:15am Add comment Please sign in to comment 0
  • If the above action does not solve the issue, contact HP or an authorized service provider.
  • If you have found the information useful and possibly saved you a service call, a donation would go a long way in keeping the articles coming and help my family understand

Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps. Hope this helps you. Figure 26: Opening rear door Remove any paper found. I have done everything i can think of short of taking the entire thing apart.

Replace the D.C. Never overlook the easy stuff first. If the paper is folding into an accordion shape, make sure the print cartridge shutter (black plastic hinged piece covering the drum) located on the bottom of the cartridge opens when Replace the D.C.

top 13.12.07 JAM IN STAPLER Description There is a jam in the stapler cartridge. Reply With Quote 11-09-2009 #5 ExOceMan View Profile View Forum Posts Private Message Trusted Tech 50+ Posts Join Date Sep 2009 Location Seattle, Washington Posts 63 Post Thanks / Like Thanks Action NOTE: Press the ? (help) button for detailed information about clearing the jam. Hopefully with the above article you can troubleshoot diagnose the 60.2 error in your machine and get it back up in running without the need for an expensive repair bill.

If the message appears only with a certain software program or print job, contact the software vendor for assistance. Whenever the printer is ready, not busy, and has no pending warning messages, the status message “Ready” is displayed if the printer is online. If the above action does not solve the issue, contact HP or authorized service provider. The stapler/stacker LED blinks in amber.

The line voltage and current source at the printer location might need to be inspected to ensure that it meets the printer’s electrical specifications. http://spamdestructor.com/printer-error/printer-error-58-04.php Facebook Twitter Google+ YouTube LinkedIn Tumblr Pinterest Newsletters RSS Hp Error Code 60, Service Errors 60, Repair Codes Message HP LASER PRINTER ERROR CODE 60 - FORMATTER, MEMORY, Open the top cover and remove the print cartridge. The stapler/stacker LED blinks in amber.

Action Press the (Select) button to process the page. Unweave the harness from the wire guides (callout 2). HP LASER PRINTER 9000, 9040, 9050MFP ERROR 60.2 IS TRAY 2, 60.3 IS TRAY 3 1. have a peek at these guys Remove the printer from any universal power supply (UPS), additional power supplies, or power strips.

Printing can continue, but behave unexpected in response to the changed settings. Symptom #3 – Pull tray feed shaft to the left. Figure 21: Removing the paper If the paper has torn, or you still cannot remove it, click here for more information about clearing jams from the fuser area Reinstall the fuser

top 49.24.02 PRINTER ERROR Description The printer has experienced a critical error.

When the tray is full, the weight of the paper on the tray can damage the gears and cause them to start skipping, which is the clicking/clunking noise. You’re Not The Only One… Big Data, Full Frontal and Mobile Movements: Welcome to 2013! Turn the printer off and then back on. Kevin For More information involving Printer Repair take a look at this site: http://www.fixyourownprinter.com/ No related posts.

Turn the printer off and then on. In other words the paper in the tray is not lifting up. Loose toner should clear from the printer after a few pages are printed. check my blog Press the (Up Arrow) button and the (Down Arrow) button to step through the instructions.

Lift motor does not rotate; no lift occurs followed by 60.X Error. The dual inline memory module (DIMM) that caused the error will not be used. A loud clunking or banging noise – from offending tray area. You can also open the shutter on the toner cartridge and see the image on the drum.If you are using refilled cartridges it's not unusual to have more than one bad

Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers top 56.1, 56.2 PRINTER ERROR To continue turn off then on Description Unknown input/output device installed. Replace tray 4 lift drive ass'y3. install the tray and listen carefully.

If the later it would take a toll on the fuser. Figure 10: Checking the quality of the inserted paper Slide the tray back into the printer. Upon removal I found a broken Tension spring part # RC1-0198-000CN. Action Check for a loose cable connection and make sure to use a high-quality cable.

Could we ask why you chose that particular site and included a link? Tray 4 lift motor error has occurred.2. NOTE: For more information and troubleshooting steps, refer to the document HP Jetdirect Print Servers - 80, 81,82, 86, and 87 Service Errors (bpj05423). alternates with 52.XY PRINTER ERROR To continue turn off then on Description A temporary printer error has occurred.

If it doesn’t, you will need to replace the sensor PS107.